Shower Nozzles with Thread

SRD-30 NRO

Shower nozzle single jet: Ruby insert with O-Ring
External screw thread M30 x 1,5
Internal diameter: On customer preference between 0,6 - 1,2 mm


The advantages of our shower nozzles:

- For the production of the nozzles we only use rust- and acid-resistant
  stainless steel. (Stoff-No.: 1.4571)
- Through the adjusted ruby insert the lifetime of the nozzle is a multiple in
  comparison to conventional nozzles.
- The ground in drill-holes of the rubies guarantee the most precise water jet
  which is possible today.
- As a seal O-Rings are used which are embedded in a flute.
- Easy assembly and dissassembly with conventional tools (Socket wrench, ring spanner wrench
  SW19). The one-piece body of the nozzle has a metric external screw thread..
- The nozzles are designed for highest water pressure.
- The special design of the nozzles eases the cleaning of the pipe brushes.
- Ease in maintenance: In the inside of the nozzle part there is an orbital draw out flute for easy
  dismantling the nozzle out of the shower pipe.
- The nozzles have a perfect cost/performance ratio.

- We have a rigorous final quality check for all products and every single nozzle is tested
  intensively.