Triple Jet Nozzle
This radically new nozzle assortment was developed especially for the demanding use of fast running paper machines where the usual single or double jet nozzles meet their limits.
The advantages of the unique construction of the triple jet nozzle are longer life times, faster production speed, and lower raise of paper when cut.
The triple jet nozzle even can be installed into existing applications with the appropriate adaptor. The optimal results will be achieved with the use of the nozzles in the easy to maintain adaptability unit from LS-Systeme.
This technique guarantees an uninterrupted flow in production and substantial increase in productivity.
Triple Jet Nozzles
Insert: Ruby
Triple Jet Nozzles
Inner diameter on customer demand between 0,3 – 0,7 mm
Extended shield |
Planar body |
Accessories:
- Thread adapter for trim nozzle,3/8 NPT outside, M 14 x 1 inside
- Thread adapter for trim nozzle,
R 3/8” (BSPT) outside, M 14 x 1 inside
- Plug-in Screen,
Mesh size 0,2 mm, Screen lenght 30 mm
 |
Advantages:
- |
high speed running machine where Single and Double Jet Nozzles are at the limit.
For the production of the nozzles we only use rust- and acid-resistant steel.
(Stoff-No.: 1.4571)
Through the adjusted ruby insert the lifetime of the nozzle is a multiple in comparison to
conventional nozzles.
The ground in drill-holes of the rubies guarantee the most precise water jet which is possible
today.
As a seal O-Rings are used. The O-Rings are designed for multiple assembly and disassembly
and last to a pressure of 160 bar.
The nozzles are screwed in the precisely fitting adapter.
For cleaning the filter can be dismantled easily.
All parts can be handled with metric Socket wrenches.
We have a rigorous final quality check for all products and every single nozzle is tested
intensively.
 |
 |
 |
 |
